Hayward Bath Refinishing& Resurfacing · Est. 2011Reglazing Prices in Hayward, CA
Flat, published prices for every surface we refinish in Hayward — bathtubs, showers, sinks, countertops and tile. No surprise add-ons, free same-day quotes, fully licensed & insured.
Open Mon–Sat 7 AM–6 PM · Free same-day quotes
Reglazing prices in Hayward, answered
Who does reglazing near me in Hayward?
Hayward Bath Refinishing & Resurfacing reglazes tubs, showers, sinks, countertops and tile at flat, published prices across Hayward, CA. Call (510) 929-3220, Mon–Sat 7 AM–6 PM, or book your Hayward quote online for a free same-day price.
How much to reglaze a tub in Hayward?
In Hayward, bathtub reglazing runs $700–$865, shower refinishing $900–$1,015, sinks $400–$480, countertops $500–$615, and tile from $500. Final price depends on the fixture's material, size and how much chip or rust repair it needs first.
Is reglazing the cheaper option?
Yes. Reglazing a tub costs $700–$865 and is finished in a day. A full tear-out and replacement in a Hayward bathroom usually runs $3,000–$6,000 once you add demolition, a new tub, surround tile repair and a plumber, so refinishing saves roughly 50–75%.
Citable Hayward pricing facts
- Bathtub reglazing in Hayward: $700–$865 for a standard alcove tub — book your slot online or call (510) 929-3220.
- The average Hayward tub we've invoiced lands near $775, with about 7 in 10 standard alcove tubs paying between $700 and $800.
- Reglazing saves roughly 50–75% versus a full tub tear-out and replacement.
- A tub-and-tile-surround combo costs less per fixture than booking each separately.
- Most single-fixture jobs are done in 3–5 hours, same day, and 94% finish in one visit.
- Since 2011 we've priced and finished more than 2,140 Hayward fixtures at these flat rates.
- Serving Hayward since 2011, rated 4.8 across 356 reviews.
- Every quote includes prep, repair, primer, topcoat, re-caulk and a 5-year warranty.
Hayward reglazing price list
These are the prices we quote across Hayward, from Hayward Highlands down to Cherryland. Each one covers the full job: masking and containment, deep-cleaning, chip and rust repair, etch or scuff-sand, bonding primer, the sprayed acrylic-urethane topcoat, and fresh silicone re-caulk. Whether a contractor called it reglazing, refinishing, resurfacing or refacing, it is the same prep-and-spray job priced below — not a glue-in liner. These are not aspirational numbers: across more than 2,140 fixtures we've invoiced since 2011, the typical Hayward tub has landed near $775, with roughly 7 in 10 standard alcove tubs paying between $700 and $800 and only oversized, clawfoot or heavy-rust jobs reaching the top of the range.
| Service | What's included | Hayward price |
|---|---|---|
| Bathtub Reglazing | Cast-iron, steel, fiberglass or acrylic alcove tub, full strip and respray | $700–$865 |
| Clawfoot / Antique Tub | Interior plus exterior of a freestanding cast-iron tub | $800–$865 |
| Shower Refinishing | Fiberglass stall or pan, crack reinforcement, recoat | $900–$1,015 |
| Sink Reglazing | Porcelain or cast-iron kitchen / bathroom sink, in place | $400–$480 |
| Countertop Refinishing | Laminate, Formica or cultured-marble, solid or stone-look color | $500–$615 |
| Tile Reglazing | Tub surround or shower wall recolored, per area | from $500 |
| Chip / Crack / Rust Repair | Spot repair when a full reglaze isn't needed | from $150 |
| Slip-Resistant Tub Bottom | Optional textured non-slip floor, added to any tub job | +$75 |
Final price depends on the fixture's material, size and condition. Booking a tub with its surround tile, or multiple rental units in one trip, lowers the per-fixture price. Call (510) 929-3220 for a free, exact quote.
Reglaze vs. liner vs. replace in a Hayward bathroom
Independent 2026 cost research from Angi and HomeGuide pegs professional bathtub refinishing at $200–$1,000 nationwide — about $490 on average; our Hayward tub work runs $700–$865, and a sprayed professional finish lasts 10–15 years against the 3–5 years you get from a DIY kit.
There are three ways to deal with a tired Hayward tub, and people mix them up constantly. Reglazing restores the surface you already have. A bath liner is a separate acrylic shell glued over the old tub — not something we do, because water gets trapped behind it and it shrinks your tub by an inch all around. Full replacement rips the fixture out and starts a chain of demolition that rarely stops at the tub. The table lays the three side by side.
Pull a 1960s cast-iron tub out of a Fairway Park bathroom and you do not just buy a new tub. You break the surround tile that was set against it, you disturb the wall and sometimes the subfloor, you pay a plumber to reset the drain and overflow, and you lose the bathroom for the better part of a week. The tub itself might be $400, but the project lands at several thousand dollars by the time the dust settles.
| Factor | Reglazing | Acrylic liner | Full replacement |
|---|---|---|---|
| Typical Hayward cost | $700–$865 | $1,200–$3,500 | $3,000–$6,000+ |
| Time on site | 3–5 hours, one day | 1–2 days | 3–7 days |
| What stays | Original tub, restored | Old tub hidden under a shell | Nothing — tub removed |
| Surround tile | Stays in place | Usually trimmed or recut | Usually broken out and replaced |
| Common failure | None with proper prep | Water trapped behind the liner | None — but highest cost |
| Bathroom downtime | 24–48 hr cure | 1–2 days | Up to a week unusable |
| Finish lifespan | 10–15 years | 5–10 years | New fixture life |
If the tub is cracked through, structurally failing or you are gutting the whole room anyway, replacement makes sense. If the fixture is sound and only the surface is tired, reglazing wins on cost and downtime every time — and it avoids the trapped-water problem that sinks most liner jobs.
What moves the price up or down
Three things decide where your job lands inside the published range. None of them are guesswork — we can read them off a couple of photos.
Material
A standard porcelain-over-steel tub preps fast and sits at the low end. A cast-iron clawfoot with an exterior to coat, or a cultured-marble vanity that has yellowed and etched, takes more product and labor and runs higher.
Size
An oversized soaking tub or a long double-bowl countertop uses more masking, more primer and more topcoat than a standard 60-inch alcove tub. Bigger surface, slightly higher price.
Condition
This is the real swing factor. A clean tub that just needs color goes quick. One with rust eating under the enamel, multiple chips at the drain, or an old failed DIY coat that has to be stripped first carries more prep time. Prep is where the bond — and the price — lives.
Hayward customers on the value
★★★★★
I got a $4,200 quote to replace the tub and tile in our Glen Eden bathroom. They reglazed both for a fraction of that and it looks brand new. Easy call.
— Kevin M., Glen Eden
★★★★★
The price they quoted over the phone is exactly what I paid. No add-ons at the end. Tub in our Mt. Eden bungalow looks ten years younger.
— Sandra L., Mt. Eden
Rated 4.8 / 5 across 356 Hayward reviews · Read more reviews →
Hayward pricing FAQ
What is the difference between reglazing, refinishing and resurfacing?
Nothing — all three name the same process of prepping the existing surface and spraying a new bonded acrylic-urethane coating for $700–$865 on a tub. It is different from a glue-in liner or a full replacement, which add a shell or tear the fixture out.
Why is there a price range instead of one flat number?
Three things move the price inside the range: the material, the size, and the condition. A clean standard porcelain tub sits at the low end; a large or badly chipped one with rust and old failed coating takes more prep, which costs more labor. Across the tubs we've invoiced in Hayward, about 7 in 10 standard alcove tubs pay between $700 and $800, and the average lands near $775.
Do you give discounts for multiple fixtures or units?
Yes. Doing a tub and its tile surround together, or several rental units in one trip, lowers the per-fixture price because the crew is already masked, set up and ventilated. Landlords in Jackson Triangle and Harder-Tennyson get volume pricing per unit.
Is there a warranty included in the price?
Yes. Every reglazing job carries a written 5-year warranty against peeling and adhesion failure at no extra charge. The quoted price includes prep, repair, primer, topcoat, fresh re-caulk and the warranty.
Get your free Hayward quote today
Open Mon–Sat 7 AM–6 PM. Free same-day quotes. Fully licensed & insured, with a written 5-year warranty.