Hayward Bath Refinishing& Resurfacing · Est. 2011Reglazing FAQ in Hayward, CA
Straight answers to the questions Hayward homeowners and landlords ask most — cost, cure time, lifespan, materials, peeling and warranty. Still stuck? Call us.
Open Mon–Sat 7 AM–6 PM · Free same-day quotes
The short version
Reglazing restores the surface of a tub, shower, sink, countertop or tile you already own by spraying on a new bonded coating. In Hayward it costs $700–$865 for a tub, takes 3–5 hours, cures in 24–48 hours and lasts 10–15 years. The detailed answers below cover the rest. Anything not listed here, call (510) 929-3220 and ask.
Cost, time and value
How much does bathtub reglazing cost in Hayward?
In Hayward, bathtub reglazing runs $700–$865. Showers are $900–$1,015, sinks $400–$480, countertops $500–$615, and tile starts at $500. The exact figure depends on the material, the size of the fixture and how much chip, crack or rust repair it needs first.
How long does bathtub reglazing last?
A professionally sprayed acrylic-urethane finish lasts 10–15 years with normal care. Bargain DIY roll-on kits usually start peeling in 3–5 years because they skip the acid etch and bonding primer that make the coating stick.
How long before I can use a reglazed tub?
The surface is dry to the touch in a few hours and ready for normal use 24–48 hours after the final coat. Keep water, mats and shampoo bottles off the tub until that cure window closes so the finish hardens fully.
How long does the job take?
Most single-fixture jobs are finished in 3–5 hours, same day. We mask and ventilate the room, prep and repair, then spray several coats in one visit so a tenant or family is back to one working bathroom by evening.
Is reglazing cheaper than replacing a tub in Hayward?
Yes. Reglazing a tub costs $700–$865 and is done in a day, while a full tear-out and replacement in a Hayward bathroom runs $3,000–$6,000 once you add demolition, a new tub, tile repair and a plumber. Refinishing saves roughly 50–75% and avoids wall damage.
What we can and can't reglaze
What is the difference between reglazing, refinishing and resurfacing?
Nothing — they are three words for the same job: restoring a fixture's surface with a new bonded coating. They are different from a glue-in tub liner or a full replacement, both of which leave the original surface in place or remove it entirely.
What's the difference between reglazing, refinishing, resurfacing and refacing?
There isn't one. Reglazing, refinishing, resurfacing, refacing and re-enameling all name the same Hayward job: bonding one fresh acrylic-urethane coating onto your existing tub, shower, sink, countertop or tile so it looks new, with no tear-out. The "refacing" you may have searched for is the same prep-and-spray we do for $700–$865 on a tub. None of these is a bath liner or insert — that's a separate acrylic shell glued over the old fixture, while we restore the original surface in place.
Can you reglaze a fiberglass tub or shower?
Yes. Fiberglass and acrylic tubs and shower stalls are scuff-sanded and treated with an adhesion promoter instead of an acid etch, then sprayed with the same topcoat. This restores faded, crazed gelcoat that is common in Hayward's 1970s and 1980s apartments.
Can you reglaze bathroom tile instead of replacing it?
Yes. We clean and etch the tile and grout, apply a bonding coat, then spray a new color over the field. Tile reglazing starts at $500 and changes the color of an outdated tub surround or shower wall without tear-out.
Can you reglaze a clawfoot or antique cast-iron tub?
Yes. Antique cast-iron and clawfoot tubs reglaze beautifully because the iron underneath is sound — only the enamel has worn. We can coat the interior alone or the interior plus the exterior in a color of your choice.
Can I change the color of my tub or tile?
Yes. Most Hayward jobs go to a clean white or off-white, but we can spray almond, biscuit, gray and other solid colors, and stone-look finishes on countertops. Recoloring an avocado or pink surround is one of the most common requests we get.
Peeling, DIY, fumes and upkeep
Why is my reglazed tub peeling, and can it be fixed?
Peeling almost always means the previous coat was sprayed over a dirty or un-etched surface, so it never bonded. We strip the failed finish, re-prep the substrate down to sound material, and re-spray it correctly. The repair is warrantied.
Can I reglaze a bathtub myself with a DIY kit?
You can, but the roll-on hardware-store kits usually peel within 3–5 years because they skip the acid etch, bonding primer and sprayed topcoat that make a professional finish bond and last 10–15 years. Most peeling tubs we strip and redo were DIY jobs.
Is bathtub reglazing safe — what about the fumes, pets and pregnancy?
The coating gives off a strong solvent smell while it is sprayed, so we mask and run forced ventilation throughout the job. Keep pets, kids and anyone pregnant out of that bathroom during the work and for a few hours after; cracking a window and running the fan that evening clears the odor fast. Once it has aired out and cured for 24–48 hours the finish is inert and odorless. We handle the products in protective gear so you don't have to be in the room while we work.
How do I clean and care for a reglazed tub?
Use a non-abrasive liquid cleaner and a soft cloth or sponge — no powdered scrubs, steel wool or harsh bathroom acids. Avoid rubber bath mats with suction cups, which trap water against the finish. Cared for this way, the coating holds its gloss for 10–15 years.
Do you add a slip-resistant bottom?
Yes. We can spray a textured slip-resistant finish on the tub floor for an extra $75. It is a common add-on for rentals and homes with kids or older adults, and it cures with the rest of the surface.
Landlords, areas, licensing and warranty
Do you work with Hayward landlords and property managers?
Yes. Rental turnover is the bulk of our work in Jackson Triangle, Harder-Tennyson and Cherryland. We refinish worn tubs and surrounds between tenants, usually same day, and bill the property manager directly with volume pricing on multiple units.
What areas of Hayward do you serve?
We cover all of Hayward — Hayward Highlands, Fairway Park, Mt. Eden, Cherryland, Glen Eden, Jackson Triangle, Burbank, Southgate, Harder-Tennyson and Downtown Hayward — across ZIP codes 94541, 94542, 94544 and 94545.
Are you licensed and insured, and is there a warranty?
Hayward Bath Refinishing & Resurfacing is fully licensed and insured, and every reglazing job is backed by a written 5-year warranty against peeling and adhesion failure.
Question not answered? Just call.
Open Mon–Sat 7 AM–6 PM. Free same-day quotes. Fully licensed & insured, with a written 5-year warranty.