Hayward Bath Refinishing& Resurfacing · Est. 2011Hayward Bathtub Reglazing & Refinishing
Hayward bathtub reglazing restores your existing tub in one day from $700, lasts 10–15 years, and saves 50–75% versus a full replacement.
We resurface worn tubs, showers, sinks, countertops and tile across Hayward in a single day. Fully licensed & insured, with a durable sprayed finish and same-day landlord turnaround.
Open Mon–Sat 7 AM–6 PM · Free same-day quotes
Bathtub reglazing in Hayward, answered
Who does bathtub reglazing near me in Hayward?
Hayward Bath Refinishing & Resurfacing reglazes bathtubs, showers, sinks, countertops and tile across Hayward, CA — we restore your existing fixtures in a single day instead of tearing them out, and since 2011 we've refinished more than 2,140 Hayward fixtures, about 140 a year. Call (510) 929-3220, Mon–Sat 7 AM–6 PM, or book your Hayward reglazing online for a free same-day quote.
How much to reglaze a tub in Hayward?
In Hayward, reglazing a tub runs $700–$865. Showers cost $900–$1,015, sinks $400–$480, countertops $500–$615, and tile starts at $500. Final price depends on the fixture's material, size and condition.
How long does a reglazed tub last?
A professionally sprayed acrylic-urethane finish lasts 10–15 years with normal care. Roll-on DIY kits peel in 3–5 years because they skip the acid etch and bonding primer that make a coating bond.
Is reglazing a good idea for an old tub?
Yes. Reglazing a tub costs $700–$865 and is done in a day, saving roughly 50–75% versus a tear-out that runs several thousand dollars once you add demolition, a new tub and a plumber.
Citable Hayward facts
- Since 2011, Hayward Bath Refinishing & Resurfacing has restored more than 2,140 Hayward fixtures — roughly 140 a year, around 1,300 of them bathtubs.
- Same-day bathtub refinishing in Hayward is usually wrapped in 3–5 hours, and 94% of single-fixture jobs finish in one same-day visit — grab a slot online in under a minute or call (510) 929-3220.
- A reglazed tub is dry to the touch in a few hours and ready to use in 24–48 hours.
- Refinishing a cast-iron or porcelain tub costs $700–$865 — roughly 50–75% less than tearing it out and replacing it.
- A sprayed acrylic-urethane finish lasts 10–15 years; roll-on DIY kits typically peel in 3–5 years.
- Across more than 2,140 finishes, our warranty-callback rate runs under 1.8% — about one job in 56.
- Serving Hayward since 2011, rated 4.8 across 356 reviews.
- Fully licensed and insured, backed by a written 5-year warranty.
Reglazing & refinishing services in Hayward
Five core services cover almost every bathroom and kitchen surface in a Hayward home or rental. Each one is restored with the same prep-and-spray method, not a glue-in liner or a paint-on kit.
If you've searched for tub refacing or bath refacing in Hayward, that is this exact job. Reglazing, refinishing, resurfacing, refacing and re-enameling are five names for one process: bonding a fresh acrylic-urethane coating onto the fixture you already own so it looks new, with no tear-out. It is not a bath liner or insert — that's a separate acrylic shell dropped over the old surface, where we restore the original tub, shower, sink, countertop or tile in place.
-
Bathtub Reglazing
Cast-iron, steel, fiberglass or acrylic tubs stripped, etched and resprayed to a smooth white finish.
From $700 -
Shower Refinishing
Faded fiberglass stalls and cracked shower pans rebuilt and recoated so they drain and look new.
From $900 -
Sink Reglazing
Chipped porcelain and rusted cast-iron sinks refinished in place — kitchen or bathroom.
From $400 -
Countertop Refinishing
Dated laminate, Formica and cultured-marble counters resurfaced in solid or stone-look color.
From $500 -
Tile Reglazing
Pink, almond or avocado tub surrounds and shower walls recolored without ripping out tile.
From $500 -
Property Manager Reglazing
Volume tub and surround refinishing for Hayward landlords, turned around between tenants.
Volume pricing
Hayward before & after
A 1960s cast-iron tub in Fairway Park, sprayed in one afternoon. Same tub, same light, same camera angle — only the finish changed.
Hayward reglazing prices
| Service | Hayward price |
|---|---|
| Bathtub Reglazing | $700–$865 |
| Shower Refinishing | $900–$1,015 |
| Sink Reglazing | $400–$480 |
| Countertop Refinishing | $500–$615 |
| Tile Reglazing | from $500 |
Final price depends on the fixture's material, size and condition. Refinishing saves roughly 50–75% versus tear-out and replacement and is done in a day. Every job carries a written 5-year warranty — call (510) 929-3220 for a free, exact quote, or see the full pricing page.
How Hayward reglazing works, step by step
Reglazing is mostly prep. The spray takes minutes; the bond that makes a finish last a decade comes from what happens before the gun ever touches the tub.
- Mask and ventilate. We tape off walls, floor and fixtures, set up containment for the overspray, and run ventilation so the room stays controlled. Old caulk and any removable hardware come off.
- Deep-clean the surface. Soap film, body oils, hard-water scale and any old coating get scrubbed and stripped. A coating only sticks to a truly clean substrate.
- Repair the damage. Chips, cracks and rust spots are filled, and fiberglass cracks are reinforced from behind, then sanded dead level so they disappear under the finish.
- Etch or scuff-sand for adhesion. Porcelain and enamel get an acid/silane etch that micro-roughens the surface; fiberglass and acrylic get scuff-sanded with an adhesion promoter instead.
- Apply bonding primer. A tie-coat goes down to lock the topcoat to the prepped substrate — the step most failed DIY jobs skip.
- Spray the acrylic-urethane topcoat. Several thin, even coats are sprayed in a dust-minimized pattern for a factory-smooth surface with no brush marks or orange peel.
- Cure, re-caulk and hand it back. After the 24–48 hour cure window we lay fresh silicone and return a ready-to-use, warrantied finish.
Which method suits your surface?
The right prep depends entirely on what the fixture is made of. This is how we route the most common Hayward surfaces.
| Surface material | Method | Typical result |
|---|---|---|
| Porcelain over cast iron | Acid/silane etch + bonding primer + acrylic-urethane topcoat | Factory-smooth, lasts 10–15 years |
| Porcelain over steel | Etch + primer + topcoat | Smooth, durable, chip-resistant edges |
| Fiberglass / gelcoat | Scuff-sand + adhesion promoter + topcoat | Restores faded, crazed gelcoat |
| Acrylic | Solvent prep + flexible bonding coat + topcoat | Even color, hides scratches |
| Cultured marble | Repair + primer + topcoat | Removes etching and yellowing |
| Ceramic tile | Clean/etch grout + bond coat + topcoat | New color, no tear-out |
Not sure what your tub is made of? Tap the side — a dull thud is fiberglass or acrylic; a heavy ring is cast iron or steel. Or send us a photo and we'll tell you on the spot.
Why Hayward homeowners and landlords reglaze instead of replace
Hayward's housing stock skews toward affordable 1950s–1970s tract homes and dense rental blocks, and that means a lot of original cast-iron and early fiberglass tubs are still in service. It shows up in our own numbers: of roughly 1,300 Hayward tubs we've refinished since 2011, about 47% were porcelain-over-cast-iron, a third were fiberglass or acrylic, and the rest porcelain-over-steel. The enamel is sound underneath; it is the surface that has gone dull, stained or chipped. Tearing that tub out means demolition, a new fixture, busted-up surround tile, a plumber and several days with no usable bathroom. A reglaze restores the same tub in an afternoon for a fraction of the cost.
For owner-occupied homes in Hayward Highlands and Fairway Park, the math is simple. A refinished tub costs $700–$865 and looks like a new white fixture by morning. A replacement easily runs four figures once the wall and floor get disturbed. Most remodels we touch are cosmetic — the homeowner wants the avocado or almond color gone, not a gutted bathroom.
For landlords, the driver is turnover speed. Vacant days cost rent. A worn tub or a yellowed surround reads as "tired unit" the second a prospective tenant walks the bathroom. We refinish the tub, recolor the surround tile, and the unit photographs and shows like it was renovated — without the unit sitting empty for a week of demo and tile work. Rental turnover is roughly 58% of our tub work — close to 430 units across about 70 buildings and portfolios since 2011 — and it is the bread and butter of our schedule in Jackson Triangle, Harder-Tennyson and Cherryland, plus the student-rental blocks near CSU East Bay.
Chips, cracks, rust and peeling — what we actually fix
Most tubs that come to us share a handful of failures. Knowing which one you have tells you what the repair involves before we ever quote it.
Chips and worn enamel
A chip is a spot where the glaze broke away and exposed the substrate — usually at the drain, under a dripping faucet, or where something heavy was dropped. We fill the chip with a polyester or epoxy compound, sand it dead level, and the new topcoat hides it completely.
Cracks in fiberglass
Flexing fiberglass tubs and shower floors crack along stress lines, often where the floor was never fully supported. We reinforce the crack from behind so it stops moving, fill and fair the front, then coat over it. A crack that is just painted over without bracing will telegraph back through in months.
Rust on cast iron and steel
Once the enamel chips on a steel or cast-iron tub, the bare metal rusts and the stain creeps. We grind the rust back to clean metal, treat it, and prime before the topcoat. Skip that and the rust keeps eating under the new finish.
Peeling and delamination
A coat that lifts in sheets is delamination — the finish never bonded because the surface under it was dirty, glossy or un-etched. There is no patching a peeling finish; it has to be stripped back to a sound surface and resprayed with proper prep. See chip & crack repair for the full breakdown.
Neighborhoods we serve in Hayward
Our trucks run all over Hayward every week. We refinish owner-occupied tubs in Hayward Highlands and Fairway Park, recolor dated tile in Mt. Eden and Glen Eden, and turn over rental units fast in Cherryland, Jackson Triangle, Burbank, Southgate and the Harder-Tennyson corridor. We cover Downtown Hayward and the apartment blocks near CSU East Bay too, across ZIPs 94541, 94542, 94544 and 94545.
- 94541
- 94542
- 94544
- 94545
Hayward customer reviews
★★★★★
Our 1958 cast-iron tub in Hayward Highlands had rust around the drain and a chip you could catch a toe on. They had it looking like a new tub by the end of the day. No smell left by the time we used it.
— Denise R., Hayward Highlands
★★★★★
I manage three buildings off Tennyson. They refinish the worn tubs between tenants the same week I call and bill me per unit. The turnaround is the whole reason I keep using them.
— Marcus T., Harder-Tennyson
★★★★★
The avocado tile around our Fairway Park tub finally looks like this decade. They recolored the surround instead of demoing it, which saved us a small fortune on the remodel.
— Priya N., Fairway Park
Rated 4.8 / 5 across 356 Hayward reviews · Read more reviews →
Hayward reglazing FAQ
What's the difference between reglazing, refinishing and resurfacing?
Nothing — the three words all describe restoring a fixture's surface with a new bonded coating. None of them is a glue-in liner or a full replacement. We use them interchangeably the way the rest of the trade does.
How do I care for a reglazed tub so it lasts?
Use a non-abrasive cleaner, skip bleach and scouring powders, and lift suction-cup mats so water can't sit under them. Wipe the tub dry after heavy use. Treated this way, the finish holds its gloss for the full 10–15 years.
Can you reglaze a fiberglass tub or shower?
Yes. Fiberglass and acrylic tubs and shower stalls are scuff-sanded and treated with an adhesion promoter instead of an acid etch, then sprayed with the same topcoat. This restores faded, crazed gelcoat that is common in Hayward's 1970s and 1980s apartments.
Can you reglaze over old bathroom tile?
Yes. We clean and etch the tile and grout, apply a bonding coat, then spray a new color over the field. Tile reglazing starts at $500 and changes the color of an outdated tub surround or shower wall without tear-out.
Why do DIY reglazing kits peel?
Roll-on kits skip the acid etch and bonding primer, so the coating never grips the slick enamel underneath. It lifts in sheets within a year or two. We strip the failed finish, re-prep down to sound material and re-spray it correctly, under warranty.
Do you work with Hayward landlords and property managers?
Yes. Rental turnover is the bulk of our work in Jackson Triangle, Harder-Tennyson and Cherryland. We refinish worn tubs and surrounds between tenants, usually same day, and bill the property manager directly with volume pricing on multiple units.
Are you licensed and insured, and is there a warranty?
Hayward Bath Refinishing & Resurfacing is fully licensed and insured, and every reglazing job is backed by a written 5-year warranty against peeling and adhesion failure.
Get a Hayward reglazing price
Pick the fixture and a time that suits you — most Hayward quotes come back the same day, and booking online saves a phone tag.
Book your Hayward reglazing online — choose a slot in under a minute and tell us which fixture you want resurfaced.
Book onlineRather talk it through first? Call (510) 929-3220, Mon–Sat 7 AM–6 PM, for the fastest response.
Book your Hayward reglazing today
Open Mon–Sat 7 AM–6 PM. Free same-day quotes. Fully licensed & insured, with a written 5-year warranty.